Being a careful driver and scheduling maintenance for your Dexter 21 35 oil cap is important. Your trailer deserves the best care, and you should always give it a yearly service check. One of the more pressure issues, however, is whether or not you can go from an oil bath-type axle to using grease. It’s a question more are asking when buying a new trailer. You can actually go from an oil bath-type axle to using grease. So, why should you make the change?
Why Switch to Grease?
Oil and grease are widely contested when it comes to being the better lubrication for bearings. When it comes down to it, however, it depends on the trailer and what you personally feel is best. A grease is a popular option because it does not leak. When you use grease as the lubricant, it’s less likely to leak, even when the seal is worn out. Oil is less forgiving, and when it leaks, it can cause issues with brakes and other such components. It’s why more drivers prefer grease to oil.
Grease Offers Greater Longevity
Grease is typically a more popular option because it lasts longer than oil. It contains thickeners and that ensures the volume outlasts oil. You might not think too much about such things, yet it’s an important concept to think of. Oil shouldn’t be ruled out entirely, especially since it has a lot to offer. Of course, grease is becoming the lubricant of choice among drivers everywhere. It’s great for trailers and making the change isn’t too difficult either.
Why Oil is Worth Trying
Axle bearings go through a lot while on the road. The terrain is tough, and the trailer needs reliability to get to its destination. Oil is typically the choice for trailers because it’s effective for extended periods on the road. When you’re moving heavy loads, it will be the trailer’s bearings that take the weight and will start feeling the pressure. Oil can be used to move the heat away from the bearings, making it flow better. The Dexter axle oil cap is less likely to sustain damage and that’s why oil is quite popular. Click here to read more about Lubrication: Grease or Oil?
Grease Creates More Work for Drivers
While you can change from an oil bath-type axle to a greased axle, it comes down to what’s easier for you and your trailer. What you might not know is that oil is often easier to change than grease. You don’t have to disassemble any hardware whereas greasing does. You can also measure the oil easier than grease and that does present a problem or two. If you don’t grease the bearings sufficiently, damage can occur.
Choose What’s Best for Your Trailer
Going from an oil bath to grease on a trailer is possible and not difficult to do. It must be right for your trailer, however. You want something that is easy to maintain and will enhance the trailer’s road abilities. Grease and oil have their advantages (along with a few disadvantages), so you have to decide what’s best for your trailer. Just remember, proper maintenance is needed for your Dexter 21 35 oil cap, filters, and bearings. Visit https://link.springer.com/article/10.1007/s10010-019-00373-2 to read about Minimizing gear friction with water-containing gear fluids.
