Lubrication: Grease or Oil?
It’s important to maintain a Dexter axle oil cap as much as it is to lubricate the bearings. Vehicles of all shapes and sizes have bearings and these are fragile when they’re not cared for properly. Under-lubricating the bearings can cause failure. This puts lives at risk and it’s just one easy way to ruin your vehicle. Remember, lubrication is about preventing corrosion, along with reducing friction, and wear and tear. So, what makes better lubrication – oil or grease?
When Oil Should Be Used
Oil dissipates heat quicker than grease and it means oil is ideal for heavy-duty and high-speed vehicles. You might want to ensure the bearings are below the lube ports on your vehicle or trailer as it’ll offer a smoother flow. Oil as a lubricant is perfect because it’s simple and very effective. Of course, it doesn’t work for every situation or vehicle. It’s the same with grease. In most cases, it’s down to the type of vehicle you’re driving.
Why Grease is Widely Used
Grease can be a smarter option when you have a linear guide and drive system. Typically, grease is the lubricant of choice because it works better. Grease usually lasts longer than oil when it comes to bearings and that’s down to the fact it has rust inhibitors, base oil, and thickeners. These make grease more compatible with systems everywhere and can be versatile in many ways too.
Avoid Over and Under-Lubrication
A Dexter 21 35 cap must be maintained well. Whether you’re going to use grease or oil as a lubricant, the bearings, and other components must be cared for properly. This typically means the proper application of lubricants. Unfortunately, it’s easy to over-lubricate bearings, as well as under-lubricate them. That might sound a bit strange, but the reality is that it all depends on how you lubricate the bearings.
For instance, oil is sometimes easier to work with at times because it’s simple enough to know when more oils need to be applied. Grease on the other hand can be trickier, although, this is becoming a more popular option. It’s all down to how versatile grease is and how easier it is to work with too. Of course, it all depends on your skills and what you’re greasing. You can read about How to Lubricate Your Bearings by visiting https://www.secretweaponperformance.com/how-to-lubricate-your-bearings/
Some Machines aren’t Built for Grease
It’s really important to understand that there are many systems, and some are more compatible with oil lubrication than grease. It seems complicated at times but it’s how some machinery systems were built. Making the switch to grease lubrication can be very tricky, although not impossible. Of course, grease lubrication is often cheaper, but oil does support the pressure of the bearings. This continues to be debated and it’s difficult to be sure what is best.
Weigh Up the Pros and Cons of Both
Oil and grease can both make excellent lubrication solutions, but it sometimes depends on the system you’re working with. Regardless, it’s crucial to lubricate the bearings properly. You want to avoid under and over-lubricating them, otherwise, problems can arise. A Dexter axle oil cap should be maintained like every other part of a machine, and that means using the right lubrication. You can also read about the Effects of lubrication on gear performance: A review by clicking here.
