How to Lubricate Your Bearings
Routine maintenance is a crucial part of owning a vehicle, including the bearings and a Dexter axle oil cap. Proper care helps to extend the lifespan of an axle and ensure the vehicle runs smoothly. Best of all, most tasks are only required once a year which is perfect for those with little time. Yearly maintenance checks aren’t difficult and should be made a priority for all drivers. Bearings must be oiled and greased to ensure safety on the road. So, how can you lubricate your bearings?
Oiling the Bearings
It’s important to ensure the bearings and axles are in good condition before you start. You should check on these things once every two or three months so that you know there are no issues with them. It’s important to remove the hubs and examine the seal for damage or tears (which should be replaced if needed). Locate the oil fill hole and carefully pour the oil inside until it reaches the oil cap line. No dismantling is required.
Greasing the Bearings
Axles are only reliable when they’re properly cared for. Lubrication is necessary to ensure they function as normal. Once you’ve hit the twelve-thousand-mile mark, your bearings should be lubricated. Of course, if your vehicle is used less often, then a yearly service is all that’s required. The more you use the vehicle, the more frequent the change will be necessary. Again, this only counts when you pass twelve thousand miles. Visit https://www.secretweaponperformance.com/can-i-change-from-oil-bath-to-grease-on-my-hotshot-trailer/ to read about Can I Change from Oil Bath to Grease on my Hotshot Trailer?
Lubricating the bearings is easy to do. Place a small amount of grease on your hand and press the bearing’s outer edge into the grease. Gently force the grease into the bearing and rotate it until the entire bearing has been greased sufficiently. The bearing cup should be coated in grease as well. The Dexter 21 35 should be sufficiently lubricated and ready for the road again.
A Word of Caution
When you are lubricating the bearings, it’s important to remove all remnants of the oil or grease before replacing it with another. It isn’t something you think about but it’s important, to say the least. You shouldn’t be mixing different types of lubricants. Some just are not meant to be mixed and there could be compatibility issues too.
Call on the Professionals for Help
Lubricating a vehicle’s bearings isn’t difficult but some might struggle with it. When you aren’t confident, don’t want to, or are just not sure how to lubricate your bearings, ask a professional for help. Most mechanics will do so (for a minor fee) and can be done within a few hours.
Always Lubricate Your Bearings Properly
Bearings must be lubricated to ensure they run smoothly and are fit for road use. Oiling and greasing the bearings is easy enough to do. You do, however, need to ensure all remnants of the old oil are removed before adding any new lubrication. If you are ever in doubt (or just unable to do it yourself) contact a mechanic to help you out. Remember, proper maintenance of a vehicle is important, from the Dexter axle oil cap to proper lubrication of the bearings. Click here to read about How to Lube Your Car’s Steering and Suspension Parts.
